html-Catalog FORMAT plus - EDE 2015 - 2017

Vacuum clamping plate and accessories 716

Vacuum clamping plate

Design: Vacuum plate with slots and suction points on the upper side. Easy positioning via holes for stop pins or lateral, height-adjustable eccentric stops Lateral grooves or fastening holes allow the vacuum clamping plate to be fastened to a base plate. Fixture plates can additionally be fixed using a sword or locating pin. By inserting the sealing cord, one or more fields can be defined for the desired workpiece size. All suction points are interconnected. Application: The workpieces being machined are clamped through generation of a vacuum by means of the integrated venturi nozzle technology or with an external vacuum pump. By means of individual grid allocation it is also possible to clamp and machine multiple, different work- pieces at the same time. The vacuum clamping plate is ready to use right away since all of the necessary components are included in supply. Typical applications are milling and grinding jobs. Benefits: • Vacuum clamping plate can be operated by compressed air in combination with the integrated venturi nozzle or with an external vacuum pump

• Cost savings through use of the venturi nozzle • Low operating osts through low air consumption • Vacuum plates can be combined with each other • High holding force • Universal use • High coefficient of friction allows secure clamping of unmachined workpiece surfaces • Due to sealing cords small bumps on the workpiece surface are compensated • Default and vibration-free five-sided machining

Systems

3 Clamping

Supplied: Vacuum clamping plate made of aluminium, integrated ven- turi nozzle, silencers, vacuum gauge, check valve, 6 eccentric stops, 2 m pneumatic hose nipple for compressed air connection and 10 m sealing cord ∅ 4.5 mm. Note: Operate only with dried, filtered and unlubricated compressed air. Max. suction volume against atmosphere: 21.8 l/min. Operating pressure for max. suction volume flow: 3.5 bar. Please observe installation manual. It is also no problem to integrate the vacuum clamping plate into the AMF ‘Zero-Point’clamping system.

3962 3964

Raster 25 x 25 mm. Raster 12.5 x 12.5 mm.

3964

3962

Operating pressure bar

Order No.

max. vacuum %

No. of suction points

Dimensions L x W x H mm

Weight

kg

0150 0200 0300 0400 0401

3.5–6.0 3.5–6.0 3.5–6.0 3.5–6.0 3.5–6.0

683.50 ◊

924.50 ◊

93 93 93 93 93

1 3 9 9 9

150 x 150 x 40 1.0 300 x 200 x 40 6.0 300 x 400 x 40 12.0 400 x 400 x 40 16.0 400 x 600 x 40 24.0

1382.00 ◊ 1688.00 ◊ 1775.00 ◊ 1831.00 ◊ 1912.00 ◊ 2368.00 ◊ 2946.00 ◊ 3739.00 ◊

(342)

(342)

Adapter mat

Design: Adapter mat, rubber. Application: The sealing cord is inserted into the raster of the rubber adapter mat. Go up to the end of the area to be machined in the workpiece. Next, the adapter mat is placed onto the vacuum clamping plate. The adapter mat is perforated within the marked clamping surface using a 3-5 mm dia. hole punch. The location of the holes must be in the area of the raster cuts of the vacuum clamping plate. The workpiece to be machined is placed on it and fixed using the adjustable eccentric stops. Advantages: • The good coefficient of friction offers especially good resistance against the displacement forces that arise during machining

• The adapter mat can be cut into up to 2 mm deep without problem • If the same contours are used, the adapter mat can be reused almost endlessly, because it is not subject to wear.

3967

Dimensions L x W mm

Order No. 0005 0010 0015 0020 0025

Material thickness mm

Weight g

150 x 150 300 x 200 300 x 400 400 x 400 600 x 400

3.43 ◊ 5.70 ◊

4 4 4 4 4

110 275 550 780 1110

11.55 ◊ 15.35 ◊ 23.00 ◊

(342)

3/176

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).