Catalog FORMAT plus - EDE 2015 - 2017

854

Vertical linear measuring device

The added value of the motorized TESA-HITE versions plus M 400/700 is not only due to their technical features, but also to their convenience during use.

The association with the programmable function is an ideal solution for recurring measurements in production areas. With advanced features, complex calculations can be done, for example, when measuring in 1 and 2 coordinate directions or detecting squareness.

Design: Large range of applications, two device sizes with 405 and 705 mm or 16 inch and 27 inch measuring span. Electronics protected against solid and liquid contamination such as dust, metal particles, splashing water or oil (device IP 40, electronics IP 65). Control panel with numerical increments 0.0001/0.001/0.01 mm or 0.00001/0.0001/0.001 inch. Accuracy with standard accessories (2.5 + 3*L) µm (L in m). With connectable air bearing of the device on the test plate. Patented optoelectronic TESA measuring system. Incrementally divided glass scale, opto-electronic measurement value acceptance. Large digit display and symbols for measurement function, main display 12.7 x 6.4 mm, secondary display 6.3 x 4.2 or 3.8 x 2.9 mm. Device base made of grey cast iron, chemically nickel-plated with 3 lapped support fields on the lower surface. Roller bearing-guided measuring head, electric motor-powered movements with selectable speeds from 7.5 to 40 mm/s. RS 232 interface. Function: Slight offset of the measuring device on the test plate due to integrated air bearing. Dynamic workpiece detection with consistently even measuring force. Measurement of lengths in the form of heights and distances and the recording of diameters and angles in addition to parallelism, perpendicularity and straightness deviations, 2D measure- ment, programming, automatic measuring procedures and statistical measurement value processing. Supplied: Height gauge with a standard measuring insert carrier, a standard measuring insert with test rod and carbide measuring ball ∅ 5 mm, one reference piece for determination of the measuring probe constant (nominal value 6.350 mm/0.2500 inch). One electric pump for air bearing of the device base on the test plate, mounted, one recharge- able battery pack 6 V, one mains adapter 100 ÷ 240 Vac/50 ÷ 60 Hz, one EU mains cable and one US mains cable for the mains adapter, in transport packaging. Note: Measuring insert carriers and measuring inserts compatible with TESA MICRO-HITE. TESA data cables are found on Ç 4/128. Vertical linear measuring device HITE plus M 400/700

SCS calibration certificate

Factory standard

RS232

IP 40 IP 65

Equipment

4 Measuring

Matrix printer on the control panel

4849

With matrix printer for direct issue of the measuring results

4851

Without matrix printer

4851

4849

Measuring span mm

Order No. 0400 0700

Measurement range mm

405 705

5872.00 6526.00 ◊

5611.00 ◊ 6135.00 ◊

0–560 0–860

(497)

(497)

4/126

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).